nFEP or FEP Release Film for Resin Printers, 200x140 to 380x260mm, for Elegoo Mars and Saturn

3D Printer Release Film 2pcs/5pcs NFEP Release Film for Elegoo Mars 2 3 4 Max Pro DLP Saturn S 2 3 Ultra 4K 8K 12K UV Resin 3D Printer FEP Release Film 200mm*140mm Suitable for Elegoo Mars, Elegoo Mars Pro, Elegoo Mars 2, Elegoo Mars 3 (4K), Elegoo 3 Pro (4K) 3D Printer. 260mm*200mm Suitable for Elegoo Mars 4 (9K), Elegoo Mars 4 Max (6K), Elegoo Mars 4 DLP, Elegoo Mars 4 Ultra (9K),, Elegoo Saturn S (4K) Resin 3D Printer 290mm*210mm Suitable for Elegoo Saturn (8K), Elegoo Saturn 2 (8K), Elegoo Saturn 3 (12K), Elegoo Saturn 3/4 Ultra (12K) SLA 3D Printer. Other Models If your 3D Printer is not included in above form, then you can measure the size of your resin vat/tank, be sure the size of the release film is slightly larger than the size of the resin tank, then it can also fit your 3D printer. How to Choose - nFEP or FEP? When your prints are relatively simple and printing is not frequent, please choose traditional FEP film, because it can meet those basic needs and it is cheaper. But if you print more frequently, the prints are more complex, or you want to obtain more precise printing effects, then nFEP will be more suitable for you. Because nFEP release film with following advantages. Better Adhesion Resistance nFEP film also known as FPA film. It is more flexible and has better adhesion resistance. This just makes your prints better, since it won't stick to the film thus avoiding support's breakage, which means a higher success rate and longer life span. Notice: Please remember to re-leveling your 3D printer once change FEP film to nFEP film, as they are different thickness. Tips for How to Reduce Adhesion Please add supports evenly, because no matter what kind of release film it is, it has a certain adhesion, so every slight shaking when pulling up and down will cause the model to be uneven or mis-layered, so add supports evenly can reduce the shaking of the model and obtain a more perfect print. Ideal Replacement It is a good replacement for your 3D printer release film. Cleaning After each printing failure, the impurities in the material tank must be cleaned in time, otherwise it may cause another printing failure or even damage the release film or LCD screen. Tips for Cleaning: Use the printer's built-in cleaning function, or manually expose the bottom layer for 10-30 seconds, then lift and remove the entire cured bottom layer to remove impurities more efficiently. Soft Scraper Our this professional scraper is made of soft and smooth material, easy to scrape off residual resin without damaging the film. DO NOT USE hard plastic scraper, it will damage the film even LCD screen. Package Both sides of each film will be covered with transparent protective film. And re-packed in hardpaper envelope bag, make sure arrived in good condition. Works Display