For Bambu Lab P1P P1S A1 X2D X1C P2S Build Plate Super Tack Cool Plate Double Sided Smooth Textured Heatbed 256X256 Build Plat

We now make heated beds for nearly all printer models on the market. We’ll keep upgrading products and offer cost-effective heated beds to thank your support. Thanks for trusting us! Heatbed Compatible For For Bambu Lab X1C/X1/X1E/P1P/P1S/A1 /P2S Note: Most third-party Build Plate on the market do not have a built-in leveling QR code. For P2S and X1 series users, please disable the radar when using these Build Plate.P2S also needs to turn off QR code recognition when using our hot bed Size Size:257mmx257mm(10.12inchx10.12inch) Types Types:ESP Cool Plate Advantage: 1. New Coating Alert!!! Prints PLA without heating, supports long-term high-temperature printing of engineering materials like ABS/ASA without coating peeling, and is the only cood plate on the market that’s scratch-resistant! 2. For All 3D Filament and good adhesion Unlike other cold plates, it's a full-function model: prints PLA in enclosed environments without heating, supports long-term high-temp printing of engineering materials like ABS/ASA, and only needs 50-65℃ for PETG. 3. Simple and easy to demold After cool down,you only need to bend the build plate with your hands, and the model can be easily demolded without using other tools. 4.Come with a build in- OR Code(Cool Plate) The plate is printed with a QR code to help the X1 series printer recognize and level better. And It does not affect the printing of P1 series and A1. 5. Thickened Design(0.7±0.1mm Heatbed) The spring steel plate in our heated bed’s middle layer is Thickened electrophoretic manganese steel—more easily adsorbed by the printer's magnetic platform, with higher hardness, rust/corrosion resistance, and flexibility to bend for model removal, then returning to shape. 6. Easy to maintain scratch-resistant, Feel free to use a heatbed scraper and can be cleaned with alcohol or soap—wiping with towels or tissues leaves no lint. Glacier Cool Plate 【Very superior adhesion】The Glacier Cool plate is designed for Bambu Lab P2S P2SC P1S P1P X1C X1E A1 3D printers. These low temperature stability 3d printer build plate adhesion highly surpasses traditional PEI steel spring sheets with PLA and PETG filament. Their superior first-layer adhesion help you to keep away from glue, edge warping and print falling off. We recommend a low temperature setting of 30-35℃ for PLA filament, 55-65℃ for PETG and 70-90℃ for ABS. 【Filament Compatibility】 It excels at printing PLA, PETG and other engineering materials, and is compatible with all materials with nozzle temperatures below 300℃. It performs much better in printing adhesion with most engineering materials than PEI build plates.