Trianglelab Galileo 2 Extruder Kit for Voron Stealthburner, 9:1 Planetary Gearbox

Note: The product doesn't include any printed parts,Hope you understand. Thank you! Note: The product doesn't include any printed parts,Hope you understand. Thank you! Note: The product doesn't include any printed parts,Hope you understand. Thank you! ▊ Name: Galileo 2 Extruder Kit Directly drive extruder ▊ More product information, please visit the following website: ▊ Introduction The Galileo 2 Extruder (G2E) is designed as a drop-in replacement for Voron printers utilizing the Stealthburner toolhead. G2E features a custom large drive gear (16mm diameter) mated to an idler bearing to help prevent extruder artifacting due to gear meshing, and because it features a planetary gearbox, there's no issue with gear meshing vibrations/noise found with improperly adjusted CW2 extruders. ▊ Advantags Galileo 2 offers over Galileo 1, here's a shortlist of benefits: Galileo 2 is a full redesign, moving to a 9:1 gear ratio and optimizing the gearbox design over Galileo 1. No parts from Galileo 1 are reused with Galileo 2. Custom 9T stepper with a taller spur gear resulting in 20% higher contact surface area than existing 10T stepper designs, resulting in better wear characteristics and power transfer. Proper meshing of gears due to number of stepper teeth being divisible by number of planets (9T sun / 3 planets), which gives even loading on the planets / sun gear and improves wear characteristics and power transfer. Previous designs with 10T steppers had uneven loading on the planet gears. ▊ Warnings You must update both the gear_ratio and rotation_distance in your Klipper configuration and do a standard extruder calibration after installing the Galileo 2 Extruder. Additionally, your run_current will need to be updated. [extruder] rotation_distance: 47.088 gear_ratio: 9:1 microsteps: 16 [tmc2209 extruder] run_current: 0.6 ▊ What' s in the package?