Polar Parts

Ships to CanadaPrices in CAD

Compatible parts for Bambu Lab printers in Canada

11 results

About Bambu Lab Parts

Spare and upgrade parts made to fit Bambu Lab printers. None of them is made by Bambu Lab: each product page names the maker where the listing gives one, such as KINGROON, IdeaFormer, Mellow, SUNLU or eSUN, and lists the printer models the part was made for. The X1 and P1 series share one hotend design and the A1 and A1 Mini use another, so a hotend listed for the X1C won't fit an A1. Check your exact model before you order.

Spring steel build plates come with textured PEI, smooth PEI and cool-plate surfaces. Textured PEI suits PLA and PETG and hides marks on the underside, while a cool plate holds PLA at a low bed temperature. Abrasive filaments such as eSUN's PETG-CF wear out a stainless or brass nozzle, so pair them with a hardened steel or tungsten carbide nozzle, like the hardened steel KINGROON hotend kit or the tungsten carbide hotend for the A1 Mini. Reusable spools let you buy filament refills without a new spool each time, and rubber feet reduce the vibration a fast printer passes into a table.

Quick checks before you order

  • These are compatible parts from other makers, not Bambu Lab originals
  • X1 and P1 hotends don't fit the A1 or A1 Mini, so match your model
  • Abrasive filaments need a hardened steel or tungsten carbide nozzle

Match the printer and plate size

Plates for the X1, P1 and A1 are about 257 by 257 mm, and the A1 Mini takes a smaller plate. Check each listing's model list and dimensions, especially for newer printers such as the H2D.

Pick the surface for your filament

Textured PEI is the easy default for PLA and PETG. Smooth PEI gives a glossy underside, and a cool plate holds PLA at a low bed temperature. A double-sided plate gives you two surfaces in one.

Keep spares for the parts that wear

Nozzles and hotends wear, especially with filled filaments, and plates lose grip over time. A spare on hand means a clog or a scratched plate doesn't stop a run of prints, particularly in a classroom.

Questions about Bambu Lab Parts

Are these parts made by Bambu Lab?
No. They're compatible parts from other companies, made to fit the Bambu Lab models named on each listing. The product page names the maker when the listing gives one.
Will an X1 or P1 hotend fit an A1 or A1 Mini?
No. The A1 series uses a different hotend from the X1 and P1 series. Each hotend listing names the printers it fits, so match it to your model.
Which build plate should I get?
Textured PEI is the most forgiving for PLA and PETG and releases parts once the plate cools. Choose smooth PEI for a glossy bottom face, or a cool plate for PLA at a low bed temperature.

More in 3D Printing

Can't find the part you need?

Tell us the part name or number, and we'll review it for the catalog.

Request a product