Polar Parts

Ships to CanadaPrices in CAD

Soldering irons, tips and supplies in Canada

19 results

About Soldering Irons

A temperature-controlled iron with replaceable tips is the first tool most electronics work needs. Pen-style irons such as the T12 mini iron, the FNIRSI HS-02A and the WEP 928D-IV run from a USB-C Power Delivery charger, and the T12 mini also from a 12 to 24 V DC supply, so they heat up quickly and travel well. A station such as the SUGON A9, which takes 210, 245 and 115 handles, suits a shared bench used for hours at a time.

Tips are made for one family of iron, so match them to your handle: T12 tips for T12 irons and 951-style stations, ST and TS100 tips for TS100, TS101 and Pinecil irons, and C245 tips for 245 handles. A chisel or bevel tip (the D and BC styles) carries more heat than a fine conical tip and suits most through-hole work. For a USB-C iron, use a charger that offers the iron's full power: a 100 W iron needs a 100 W charger and a cable rated for 5 A. Round out the bench with solder wire, a stand with a tip cleaner, and a fume extractor to pull flux smoke away from your face.

Quick checks before you order

  • Tips fit one family of iron or handle, so match them before you order
  • USB-C irons need a Power Delivery charger that offers their full wattage
  • Use rosin- or flux-core solder for electronics, never acid-core

Choose a pen iron or a station

A pen iron is portable and heats in seconds, which suits a home bench, a robotics pit or a class that moves between rooms. A station with a stand and a heavier handle suits long sessions on a shared bench.

Pick leaded or lead-free solder

63/37 leaded solder melts at 183 °C and is the easiest to learn with; wash your hands after using it. Lead-free solder such as Sn99.7 Cu0.3 melts at well over 200 °C, so it needs a hotter tip.

Keep the bench safe

Always return the iron to its stand, keep the tip tinned and clean it on brass wool or a damp sponge, and work with ventilation or a fume extractor so flux smoke stays out of your face.

Questions about Soldering Irons

What soldering iron should a beginner buy?
A temperature-controlled iron with replaceable tips and a chisel or bevel tip. A USB-C pen iron or a T12 iron is a good first choice. Start around 330 to 350 °C for leaded solder and adjust from there.
Can I use any USB-C charger with a USB-C soldering iron?
It needs a USB Power Delivery charger that offers the voltage and wattage the iron is rated for, and a cable rated for that current. A charger with less power either won't start the iron or will limit how hot it gets.
Do I need a fume extractor?
Flux smoke irritates the eyes and lungs, so work with ventilation and keep the smoke away from your face. A small fan extractor with an activated carbon filter pulls it away from the work, which helps most at a crowded bench or in a classroom.

More in Tools

Can't find the part you need?

Tell us the part name or number, and we'll review it for the catalog.

Request a product