Trianglelab CHC Pro Ceramic Heating Core Hotend Kit, 115W, PT1000 or 104NT, for Ender 3 and Voron

• 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G(Used in ParCan & J-Head) (4.7k pullup) #define TEMP_SENSOR_0 5 ▉Repetier: ATC Semitec 104GT-2 ▉Klipper documentation: sensor_type: ATC Semitec 104NT-4-R025H42G Ring Heating Evenly heated to achieve 360° ring heating ，Ceramic heating ring with built-in copper plated heating ring. The ceramic can be heated evenly. Rapid heating. Realizes 360° ring heating. Supports temperatures up to 300℃ ID09L16 ceramic heater power test Roomtemperature 24℃ Controller BoardMKS BASE V1.4 Resistance at room temperature 5±1Ω 24V 115W MAX Controller Boardpowervoltage24V DC Firmware marlin2.0 No Firmwareheater power limiting Read the temperature from the LCD Record the power consumption onthe Lab PSU while passing certain temperatures Please note that the temperatures in the table are thermistor embedded in the melting zone not the actual temperatures of the heating element especially at low temperatures. The power in the table above has been deducted from the consumption of the controller board and LCD 1.03W. *Built-in 104NT-4-R025H42G Thermal Marlin Firmware Configuration • 5:100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G(Used in ParCan & J-Head) (4.7k pullup) #define TEMP_SENSOR_0 5 Repetier ATC Semitec 10GT-2 Klipper sensor_type: ATC Semitec 104NT-4-R025H42G ▉Features: Cylindrical ceramic heaters can be optimized and symmetrically heated materials The thermistor is directly installed in the BLOCK to obtain a more realistic temperature reading when the material comes out of the hot end Lightweight design, suitable for fast printing Small compression size Compatible with any V5/V6/CR10/HEMERA/MATRIX radiator, up to 300℃ degrees Celsius ▉Compatible: Volcano Hotend CR10 Hotend Hemera Htend Matrix Extruder Tatan AERO DDB-Volcano Hotend KIT ▉What's in the box: Set 1: 24V CHC Pro 104NT-4 Kit Set 2: 24V CHC Pro PT1000 Kit